XadowTtutorial-Shaking Shaking

Introduction

For this demo, you need to use the:

  • Xadow Main Board

  • Xadow OLED

  • Xadow Accelerometer

  • Xadow Barometer.

Connect them with FFC Cables, then you need to do some preparations that refer to the first Demo’s steps. Differ from the demo1, you need to download the library:Smile and directly open SMILE INO file.

This demo functions: In normal circumstances, the OLED displays the current barometric pressure value. When you shake the Xadow Accelerometer, there will appear a smile face on the screen.

Note

Before uploading the code:smile to Xadow main board, please make sure there are the library:OLED_Display12864 and DigitalAccelerometer_ADX345 in the Arduino Library. If not, please download them and put them on the libraries file of Arduino IDE by the path: ..\arduino-1.0.1\libraries after unzipping. Do not forget to select Seeed Xadow from the Tools | Board menu of the Arduino environment._

Resources

Demo2 SMILE Code

Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:

  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.

An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.

Happy hacking