Skip to main content

Xadow - NFC Tag

Xadow - NFC Tag is a highly integrated Near Field Communication Tag module, this module is I2C interface, which base on M24LR64E-R,M24LR64E-R have a 64-bit unique identifier and 64 -Kbit EEPROM.Xadow - NFC Tag attach an independent PCB antenna which can easily stretch out of any enclosure you use, leaving more room for you to design the exterior of your project.

Specification


  • Working Voltage:5V or 3V3
  • Working Current<1mA
  • 2CM max effective range
  • Serve for contactless communication at 13.56MHz
  • ISO 15693 and ISO 18000-3 mode 1 compatible
  • 64-bit unique identifier (UID)
  • Read Block & Write (32-bit blocks)
  • I2C Interface

Usage


Read/Write by Mobile

  1. Download NfcV-reader for Androud and install it

  2. We can Read/Write it by Mobile

3.Place your phone close to a tag.

Control LED


  1. Download NfcV-reader for Android and install it

  2. Download NFC Tag Librename it to NFC_Tag_M24LR6E and put it into Arduino's library .

  3. Open Arduino IDE. If Arduino IDE is already opened, restart it.

  4. In Arduino IDE, click menus: File -> Example -> NFC_Tag_M24LR6E -> ledControl

  5. Now,you can control LED by you phone.

#include "NfcTag.h"
#include <Wire.h>

NfcTag nfcTag;
int led = 5;
bool flag = false;
bool preFlag = false;
void setup(){
Serial.begin(9600);
pinMode(led,OUTPUT);
nfcTag.init();
}

void loop(){
flag = nfcTag.readByte(EEPROM_I2C_LENGTH-1) == 0xff?true:false;
if(flag != preFlag){
Serial.println("get remote NFC control signal!");
if(flag == true){
Serial.println("led will light up!");
digitalWrite(led,HIGH);
}else{
Serial.println("led will turn dark!");
digitalWrite(led,LOW);
}
preFlag = flag;
}
delay(5*1000);
}

Schematic Online Viewer

Resources


Tech Support & Product Discussion

Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. We offer several communication channels to cater to different preferences and needs.

Loading Comments...