3.6V Micro hydro generator



Micro hydro power is clean, renewable energy. Here is a G 1/2 micro hydro generator which can supply stably output voltage and output current with the help of one voltage stabilizing circuit and one rechargeable battery. We can install it at home to save household energy, like using spray shower to light LEDs etc.

Pressure and Flow diagram

Flow and Output voltage Diagram


This module has added one voltage stabilizing circuit and one rechargeable battery, output voltage is stably 3.6v and output current is stably 300mA.

Flow and Output voltage Diagram


Weight 165 g
Output voltage 3.6V
Battery Capacity 300mA
Maximum working pressure 1.75 MPa
Working pressure 0~1.75MPa
Working temperature 0~110°C
Maximum 30mins at 110 °C
Recommend flow rate range 1.5~20 l/min(Pressure 0.05-0.2mpa)
Installation Method direction of arrow
Material nylon/glass fiber,Polyformaldehyde
Size of the input and output openings 0.8inch

Mechanic Dimensions


Hardware Installation

Help us make it better

Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!