Bracket for Infrared Proximity Sensor

Introduction

This is an aluminum infrared proximity sensor bracket kit for Infrared Proximity Sensor. With this kit,one RB-421 Servo and one Infrared Proximity Sensor you can build a 2 degrees freedom servo mount assembly. This kit is professional in steering the infrared proxinity sensor on a robot for 180° of rotation side to side and front to back. These parts also have holes at 20mm spacings so they can be attached to Seeed (http://www.seeedstudio.com/depot/starter-bundle-harness-p-906.html?cPath=178_184)Starter Bundle Harness which has 20mm spacings as well.

Application Ideas

  • Robot eyes
  • IR self controller

Mechanic Dimensions

Usage

Hardware Installation

For holding IR sensors while you can turn it with different angles

Bill of Materials (BOM) /parts list

Devic Value Manufacturer Details(size:mm)
IR sensor bracket(10034R0) 1
angle mounting bracket(10034R0) 1
Plastic rivet 2 HKWASI D3x5.5(diameter 3 length 5.5 ,black)
Plastic rivet 10 HKWASI D2X4.8(diameter 2 length 4.8 ,black)
selflocking plastic rope 2 2x56

Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:

  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.

An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.

Happy hacking