1w Solar Panel 80*100

Introduction

This is a custom solar panel, which mates directly with many of our development boards and has a high efficiency at 15.5%. Unit has a clear epoxy coating with hard-board backing. Robust sealing for out door applications!

Key Specification

PET package
Typical peak power 0.935W
Voltage at peak power 5.5v
Current at peak power 170mA
Length 100 mm
Width 75 mm
Depth 1.5 mm
Weight 33g
Efficiency 15.5%
Wire diameter 1.5mm
connector 2.0mm JST

See Also

Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:

  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.

An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.

Happy hacking