1.5W Solar Panel 81*137


This is a custom solar panel, which mates directly with many of our development boards and has a high efficiency at 16%. Unit has a clear epoxy coating with hard-board backing. Robust sealing for out door applications!


  • PCB size : 137811.5 mm

  • Monolithic : 78*11.14 mm

  • Efficiency : 16%

  • Voltage:5.5V;

  • Current:270mA

  • Power:1.5W

  • Connector: 2.0mm JST

  • Type:156 Two line;

  • PCB Material : all Glass fiber

  • PCB requirements : positive

  • Quality requirements :

    • flatness less than 0.1mm
    • clean, does not allow to have the scratch
    • take off paint the phenomenon, such as a hole does not allow to have the deviation
  • Note : tolerance Positive and negative 0.1mm

  • Name: PET laminated (1137*81)

  • Arrangement:1*11(series)NO spacing posted artical black;

Help us make it better

Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!