Scream out loud - 110dBA fixed tone Siren

Introduction

http://www.seeedstudio.com/depot/images/product/screamout.jpg

This Passive Piezoelectric Type Buzzer is made of plastic, very eye catching colors. It can generate sound over 110DBA(!), so Do not make it close to your ears when you test the buzzer. Includes build-in signal generator, just power on 6-12V and it will scream out loud.

Cautions

Caution: may cause damage to human ears, security use only.

Key Specification

Type SFB-55
Nominal voltage 12
Nominal Current 160
Voltage range 8~16
Maximun power 12
Sound Output ≥110
Operating Temp -20~+50
Storage Temp
Weight 80

Mechanic Dimensions

http://www.seeedstudio.com/depot/images/product/pbuzzer3.jpg

Version Tracker

Revision Descriptions Release
v0.9b Initial public release Jun 08, 2009

Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:

  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.

An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.

Happy hacking