UartSBee v5


UartSBee v5’ is FTDI cable compatible USB to Serial adapter equipped with BEE socket(20pin 2.0mm). The integrated FT232RL can be used for programming or communicating with MCUs. On the other hand, you might connect your PC to various wireless applications via a Bee compatible module. UartSBee provides breakouts for the bit-bang mode pins of FT232RL as well.This Bit-bang mode pins (8 I/O pins) can be used as a replacement for applications involving PC parallel port which is scares now a day.

UartSBee v5 is the Mesh Bee programmer version based on UartSBee v4.

Please refer to UartSBee v4’s wiki page for general help topics. In this wiki we focus on the difference between v4 and v5.

Added Features

  • MicroUSB interface
  • Can program Mesh Bee
  • Added SW3 to switch the connection of FT232’s UART between the TX1/RX1 pins of BEE socket and the program interface of Mesh Bee

Hardware Overview


Help us make it better

Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!