Grove - AND
This module provides the function of a logical AND gate. It is based on the 74HC1G08 chip, which is a high-speed Si-gate CMOS device that provides a 2-input AND function. The Grove - AND module therefore has two inputs on the left and one output on the right. The output is HIGH only when all the input signals are HIGH.
Simple AND gate function with two inputs and a single output
Makes integrating a Logical AND gate in your circuit a breeze
Note that this Grove - AND module is sold only as part of the above mentioned packs and is not available stand-alone from the Seeed Studio Bazaar.
Help us make it better
Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:
- Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
- Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
- Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.
An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.