Grove - Wrapper

Introduction

Grove - Wrapper is a kind of wrapper to fix and protect Grove modules. It will save you a lot of work on aligning your modules, and it will easy for you to show your project. For example, it will simpler to take pictures for showing your product on the Internet, and it will give a clear and clean scene if you use Grove - Wrapper to demo your project. What is more, it is expandable for Lego, mechanical parts, and so on, this will introduce more flavor into your works and make your project adapt to various circumstances. The design of Grove - Wrapper also make it easy to assemble and disassemble modules.

Note

  • Around 85% of all Grove modules is supported by Grove - Wrapper.
  • Grove - Wrapper series have two size of wrappers, each gets four colors, and there are totally eight SKUs that are listed at Specifications section.

Features


  • Flex fastener to install and replace Grove modules conveniently.

  • Always keep your project safe.

  • Half-open space, no disruption for using Grove modules.

  • Compatible with Lego and Makeblock modules that will make your project adapting and interesting.

  • Support being fastened with screws (M2, M4).

  • Mutual-connect-able like Lego modules does.

  • Colorful wrappers.

Applications


Specification


Dimension(big one) 25 × 25 × 13 mm
Plane dimension(small one) 25 ×25 × 13 mm
Material ABS
Color Blue, green, yellow and red for both sizes for wrapper.

Different type of wrapper and corresponding SKU

**Product name** **SKU**
Red Grove Wrapper 1*1(4 PCS pack) 110070020
Yellow Grove Wrapper 1*1(4 PCS pack) 110070021
Blue Grove Wrapper 1*1(4 PCS pack) 110070022
Green Grove Wrapper 1*1(4 PCS pack) 110070023
Red Grove Wrapper 1*2(4 PCS pack) 110070024
Yellow Grove Wrapper 1*2(4 PCS pack) 110070025
Blue Grove Wrapper 1*2(4 PCS pack) 110070026
Green Grove Wrapper 1*2(4 PCS pack) 110070027

Hardware Overview


Introduction to hardware

Fastener

Screw holes

Note you can also use rivet to replace screw to fasten it on other blocks.

How to connect Grove - Wrapper

How to install Grove modules on Grove - Wrapper

Parts list

Parts name Quantity
Grove - Wrapper(only one size in one color) 4 PCS
Cross recessed flat head screw PM2.0*H10.0MM Cross recessed flat head screw CM4.0*H8.0MM Nut(Silver) M2.0*H1.5mm 8 PCS for each items

Demos

This section(Assembly guide) will show some tips on assembling a grove modules skillfully.

Wrapper Connections

Install Grove - Wrapper on Lego blocks

Install Grove - Wrapper on Makeblock

Notes

For a novice, it may find a little hard to assemble them. Do not be frustrated. You will be skillful after trying dozen times. And if you have some experience with Lego, that will be helpful.

Resources


Mechanical Files

Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:

  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.

An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.

Happy hacking