ReSpeaker 4-Mic Array for Raspberry Pi


ReSpeaker 4-Mic Array for Raspberry Pi is a quad-microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that we can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on.

Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture, which allows the device to pick up sounds in a 3 meters radius. Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programable LEDs. With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival), do KWS(Keyword Search) and show the direction via LED ring, just like Amazon Echo or Google Home.


  • Raspberry Pi compatible(Support Raspberry Pi Zero and Zero W, Raspberry Pi B+, Raspberry Pi 2 B and Raspberry Pi 3 B)
  • 4 Microphones
  • 3 meters radius voice capture
  • 2 Grove Interfaces
  • 12 APA102 User LEDs
  • Software Algorithm: VAD(Voice Activity Detection), DOA(Direction of Arrival) and KWS(Keyword Search)


There is no audio output interface on ReSpeaker 4-Mic Array for Raspberry Pi. It is only for voice capture. We can use the headphone jack on Raspberry Pi for audio output.

Application Ideas

  • Voice Interaction Application
  • AI Assistant

Hardware Overview

  • MIC: 4 analog microphones
  • LED: 12 APA102 programable RGB LEDs, connected to SPI interface
  • Raspberry Pi 40-Pin Headers: support Raspberry Pi Zero, Raspberry Pi 1 B+, Raspberry Pi 2 B and Raspberry Pi 3 B
  • AC108: highly integrated quad-channel ADC with I2S/TDM output transition
  • I2C: Grove I2C port, connected to I2C-1
  • GPIO12: Grove digital port, connected to GPIO12 & GPIO13


If we want to use the APA102 RGB LEDs, please write HIGH to GPIO5 first to enable VCC of the LEDs.

Getting Started

Connect ReSpeaker 4-Mic Array to Raspberry Pi

Mount ReSpeaker 4-Mic Array on Raspberry Pi, make sure that the pins are properly aligned when stacking the ReSpeaker 4-Mic Array for Raspberry Pi.


Hot-plugging ReSpeaker 4-Mic Array is not allowed.It will damage the respeaker.

connection pic1 connection pic2

Install driver

The AC108 codec is not supported by Pi kernel builds currently, we have to build it manually.

1. Please Make sure running the lastest Raspbian Operating System(debian 9) on Pi. (updated at 2017.09.15)

2. Get the seeed voice card source code.

git clone
cd seeed-voicecard
sudo ./ 4mic

3. Then select the headphone jack on Raspberry Pi for audio output:

sudo raspi-config
# Select 7 Advanced Options
# Select A4 Audio
# Select 1 Force 3.5mm ('headphone') jack
# Select Finish

4. Check that the sound card name looks like this:

pi@raspberrypi:~/seeed-voicecard $ arecord -L
    Discard all samples (playback) or generate zero samples (capture)
    Default Audio Device
    Default Audio Device
    Direct sample mixing device
    Direct sample snooping device
    Direct hardware device without any conversions
    Hardware device with all software conversions

If we want to change the alsa settings, we can use sudo alsactl --file=ac108_asound.state store to save it. And when we need to use the settings again, copy it to: sudo cp ~/seeed-voicecard/ac108_asound.state /var/lib/alsa/asound.state

5. Open Audacity and select AC108 & 4 channels as input and bcm2835 alsa: - (hw:0:0) as output to test:

$ sudo apt update
$ sudo apt install audacity
$ audacity                      // run audacity

6. Or we could record with arecord and play with aplay:

arecord -Dac108 -f S32_LE -r 16000 -c 4 hello.wav    // only support 4 channels
aplay hello.wav                                      // make sure default device
                                                     // Audio will come out via audio jack of Raspberry Pi

Play with APA102 LEDs

Each on-board APA102 LED has an additional driver chip. The driver chip takes care of receiving the desired color via its input lines, and then holding this color until a new command is received.

1. Activate SPI:

- sudo raspi-config
- Go to "Interfacing Options"
- Go to "SPI"
- Enable SPI
- Exit the tool

2. Get APA102 LEDs Library and examples

pi@raspberrypi:~ $ cd /home/pi
pi@raspberrypi:~ $ git clone
pi@raspberrypi:~ $ cd /home/pi/4mics_hat
pi@raspberrypi:~/4mics_hat $ sudo apt install python-virtualenv          # install python virtualenv tool
pi@raspberrypi:~/4mics_hat $ virtualenv --system-site-packages ~/env     # create a virtual python environment
pi@raspberrypi:~/4mics_hat $ source ~/env/bin/activate                   # activate the virtual environment
(env) pi@raspberrypi:~/4mics_hat $ pip install spidev gpiozero           # install spidev and gpiozero
(env) pi@raspberrypi:~/4mics_hat $ python

DoA on ReSpeaker 4-Mic Array for Raspberry Pi

With DoA(Direction of Arrial), ReSpeaker 4-Mic Array is able to find the direction where the sound source is located.

1. setup voice engine

pi@raspberrypi:~ $ source ~/env/bin/activate                    # activate the virtual, if we have already activated, skip this step
(env) pi@raspberrypi:~ $ cd ~/4mics_hat
(env) pi@raspberrypi:~/4mics_hat $ sudo apt install libatlas-base-dev     # install snowboy dependencies
(env) pi@raspberrypi:~/4mics_hat $ sudo apt install python-pyaudio        # install pyaudio
(env) pi@raspberrypi:~/4mics_hat $ pip install ./snowboy*.whl             # install snowboy for KWS
(env) pi@raspberrypi:~/4mics_hat $ pip install ./webrtc*.whl              # install webrtc for DoA
(env) pi@raspberrypi:~/4mics_hat $ cd ~/
(env) pi@raspberrypi:~ $ git clone
(env) pi@raspberrypi:~ $ cd voice-engine/
(env) pi@raspberrypi:~/voice-engine $ python install

2. Run the demo under virtualenv. Please wake up respeaker with saying snowboy and we will see the direction.

(env) pi@raspberrypi:~/voice-engine $ cd ~/4mics_hat
(env) pi@raspberrypi:~/4mics_hat $ python

Play with Alexa, Baidu and Snowboy

1. Get Alexa or Baidu authorization

pi@raspberrypi:~ $ source ~/env/bin/activate                    # activate the virtual, if we have already activated, skip this step
(env) pi@raspberrypi:~ $ cd ~/
(env) pi@raspberrypi:~ $ git clone
(env) pi@raspberrypi:~ $ cd avs                                 # install Requirements
(env) pi@raspberrypi:~ $ python install                               
(env) pi@raspberrypi:~/avs $ sudo apt install gstreamer1.0 gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly
(env) pi@raspberrypi:~/avs $ sudo apt install python-gi gir1.2-gstreamer-1.0
(env) pi@raspberrypi:~/avs $ pip install tornado

Then open a terminal at VNC, switch to the python virtual env with

# note: this is in the VNC terminal
pi@raspberrypi:~ $ source ~/env/bin/activate
(env) pi@raspberrypi:~ $ alexa-auth

Run alexa-auth in the terminal to get Alexa authorization or run dueros-auth to get Baidu authorization. The authorization file will be saved in /home/pi/.avs.json.


If we want to switch between alexa-auth and dueros-auth, please delete /home/pi/.avs.json first. The file is hidden and use the ls -la to list the file.

2. Let’s Enjoy!

Now run python under virtualenv, we will see lots of debug message rasing in the terminal. When we see status code: 204, try to wake up respeaker with saying snowboy. Then the leds will light up, and now we can speak to it, for example, asking “who is the most handsome guy in the world?” or “Do you know how to beat-box?”. Just enjoy it!

(env) pi@raspberrypi:~/avs $ cd ~/4mics_hat
(env) pi@raspberrypi:~/4mics_hat $ python


[PDF] ReSpeaker 4-Mic Array for Raspberry Pi(PDF)

Help us make it better

Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!