Skeleton Box for Raspberry Pi Compute Module Development Kit
Looking for a shell for your electronic prototypes? The skeleton box is a handy solution. It is constructed from military grade aluminum and hardwearing acrylic, with good-looking and providing the ultimate protection from physical and corrosion! The enclosures are easy to assemble. The skeleton box is stackable in all three dimensions, allowing for limitless expansion possibilities. And this is a specially designed for Raspberry Pi Compute Module Development Kit.
Neat and universal
Easy to assemble and stackable
Solid and stable material
Assembly diagram is as follows:
|Bracket||1.5mm aluminum plate stamping molding, black sand anodized||2|
|Bottom Board||2.5mm Thickness||1|
|Top Board||2.5mm Thickness||1|
|Nylon screw pillar||M3X5+6||4|
Help us make it better
Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:
- Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
- Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
- Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.
An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.